INSTALLATION
OF ROMAN GLASS / GEM SERIES
Browse Roman Glass/Gem
Series >>
 1. Roman Glass
Tiles are thinner then most tiles and require less setting material.
This is achieved by using a 3/16”x5/32” V-notched trowel.
Do not flatten the “rows” created by the v-notched trowel
in the setting material.
2. Use enough setting material to assure 100% tile surface coverage
but not so much that it squeeze through the grout joints above
the top of the tile.
3. Carefully align each sheet as it is installed to create equal
grout joints from sheet to sheet.
4. Fill the joints between the tiles with a grout.
5. Allow tile to set until firm. Clean excess setting material
from the surface of the tile with a wet cloth or sponge while
the setting material is fresh.
|
